1, regularly check the parts, monthly, check the worm gear, worm, lubrication block bolts, bearings and other activities of the rotation of the flexible and wear conditions, found that defects should be repaired in time, not reluctantly used.
2, the machine should be placed in the dry and clean indoor use, not in the atmosphere containing acid and other corrosive gases in the body of the use of the site.
3, after the use of the machine or stop, should remove the rotating drum to clean and brush the remaining powder in the bucket, and then installed, for the next use to prepare for the work.
4, when the drum in the work before and after the movement, to adjust the M10 screws to the appropriate position. If the gear shaft is channeling, the back of the M10 screws to the appropriate position, adjust the clearance to the bearing does not occur, hand-turn belt pulley, elastic appropriate, too tight or too loose can cause damage to the machine May.
5, if the time is longer, the machine must wipe the whole body clean, the smooth surface of the parts anti-rust oil, with a cloth canopy.