Bucket elevator as an important lifting conveyor equipment, plays a vital role in the production, if the operator does not follow the operation of the Code, the maintenance of the latter is not in place, whether it is working efficiency or service life, will be greatly discounted, serious will also cause the occurrence of production accidents, the right and safe use of bucket elevator can prolong its service life, can avoid failure in the use of the process, regular maintenance to ensure the normal use of bucket elevator. The following points for the bucket elevator introduction of the following considerations and maintenance considerations:
Bucket Elevator Operation Note:
1. The hoist is maintained and managed by the designated personnel, and the key of the power switch box is managed by the designated personnel.
2, hoist must have hoist limiter and stroke limiter, the limiter should make the pulley in the lift to the distance reel or pulley 300mm before the automatic stop.
3, hoist should be the maximum load mark, in Ascension, landing weight not overload (1T).
4, after the transmission, check the winch limiter, stroke limiter, interlock switch and other safety devices, sensitive and reliable movement, and test hanging.
5, hoisting, before landing, after ringing warning, can drive.
6, the hoist must not allow manned on, down.
7, after the work, hoist magnets should be landed, and then cut off power, close up and down the guardrail door.
8, often keep the elevator around the environment.
The daily maintenance of any machine is very important, good maintenance can prolong the service life of the machine, bring higher economic benefits.
Bucket Elevator Maintenance:
1, bucket elevator should be empty load driving. So you should drain all the material in the hopper before stopping.
2, can not reverse, reverse the chain can occur derailment phenomenon, the elimination of derailment is troublesome.
3, uniform feeding, prohibit sudden increase in feed volume. The feeding capacity can not exceed the conveying capability of the hoist. Otherwise it is easy to cause the bottom of the material piled up seriously when the "boring car" accident.
4, timely replenishment of lubricating oil.
5, the chain and hopper serious wear or damage should be replaced in a timely manner.